Although Threads has just been released in recent years, it has become one of the most popular social media platforms. With millions of users, it takes time to become influential on Threads. QniThreads (Real Phone) software of Qnibot can support users in speeding up this process. QniThreads (Real Phone) is a good Threads automation bot that can automate activities on Threads with real phone devices. With QniThreads (Real Phone), users can
- Increase mass Threads followers automatically
- Auto increase bulk likes and comments for Threads posts
- Upload multiple posts with text, media, hashtags, tag names,and location on Threads
- Auto interact with Threads posts on “For You” feed
- Follow Threads accounts by user list automatically
- Change websites and bio for multiple Threads accounts automatically
Furthermore, QniThreads (Real Phone) bot of Qnibot allows users to
- Use proxies to fake IPs from various countries worldwide
- Easily use the bot with tutorials in text and videos
- Get professional and quick support
- Get free and frequent updates
- Save time and cost
To use QniThreads (Real Phone) software, you need the following materials
- Computers or VPS with Windows operating systems (configuration at least Core i5, 16GB RAM)
- In case you want to run multiple Threads accounts, you need to use proxies in the format: IP:Port or IP:Port:ProxyUsername:ProxyPassword.
WHAT IS A BOX PHONE?
A box phone is a box containing real phones connected via electrical circuits and controlled by a computer. Using a phone box instead of controlling multiple real phones one by one is a good way to automate activities and increase speed.
A. INSTALL QNITHREDS (REAL PHONE) – THREADS AUTOMATION BOT
Refer to How to buy Qnibot software to see instructions on how to buy and download our QniThreads (Real Phone) software. After downloading the software, you right-click on 
=> choose Extract Here => you will see 2 setup files, including 
and 
Next, you double click on => the Welcome to the QniThreads (Real Phone) Setup Wizard dialog box will appear => click Next
Then, the Select Installation Folder dialog box will display => click on Browse => you will see the Browse for Folder dialog box => select the folder that you want to save the installation of QniThreads (Real Phone) software => click OK => click Next
Note: do not save the installation folder of QniThreads (Real Phone) software in the Program Files (x86) folder in Disk (C:) or any folder whose name has special characters.
.
Next, the Confirm Installation dialog box will appear => click Next and wait for the installation of QniThreads (Real Phone) bot
After that, you will see Installation Complete dialog box => click Close
After completing the installation, you go to your desktop => double-click on the shortcut 
to open the QniThreads (Real Phone) software
Next, login your account at Qnibot.com to copy the provided license key and enter it into Key section => click Login
You will see the interface of QniThreads (Real Phone) software
B. HOW TO USE QNITHREADS (REAL PHONE) – BASIC SETTINGS
B1. Devices
You click Devices tab to set up phones. After connecting real phones (phone box), you tick Set up Phone. Then, at Threads Phone section, you enter the number of phones you want the software to run at the same time. Finally, you click Start.
B2. Home
After setting up phones, you click on Home tab
B2.1. Choose a script option
B2.1.1. Create and select a script
Enter the script name that you want to create into the Script Name section => click 
to add the script
Next, you select the Script you want to run at Select a script section
B2.1.2. Randomize the order of actions
You tick Randomize the order of actions if you want to randomize the selected functions in Function box.
If you want the bot to run selected functions in order, you do not need to tick Randomize the order of actions
B2.1.3. Repeat after (Minutes)
If you want the bot to repeat selected functions in Function box, you tick Repeat After (Minutes) => enter the range of time (in minutes) you want the bot to rest before repeating the selected functions.
For example, if you set up as the following photo, our Threads automation bot will randomly rest for 4 to 8 minutes before repeating the selected features.
If you do not want to repeat the selected functions, you do not tick Repeat After (Minutes)
B2.2. Control center
B2.2.1. Number of threads to run
At Number of threads to run section, you put the number of devices that you want our QniThreads software to run simultaneously.
For example, you put 30 into Number of threads to run section, our QniThreads (Real Phone) tool will run 30 devices with 30 Threads accounts at the same time.
Note: the number of threads must be equal or fewer than the number of phones you use.
B2.2.2. Import Threads accounts
To import Threads accounts, you click on Add account button => the Add Accounts dialog box will appear
Next, you create a new folder to save Threads accounts. You click on Add button at Select a folder section => the Add Folder dialog box will display => type the name of the folder you want to create in Folder name section => click Add
Then, you select the folder you want to use for saving your Threads accounts at Select a Folder section
Next, at Input format section, you choose the format you want to import accounts.
Note:
- If you choose Proxy (From Account Data) at Network section (refer to B2.3.3 section), you need to select the format containing proxy.
- In case you want to add accounts in another format apart from the available formats, you choose Other at Input format section, then you enter the format you want to import accounts => click Save Format
After that, you import Threads accounts into the box with the selected format => click Add => click OK => click Close.
The imported Threads accounts will display as shown the following photo
Next, you click on Display Configuration => tick on the configuration that you want to display => click Add => click Close
To search for any imported Threads accounts, you can select the group of accounts, then enter the account that you want to search as the following photo
You can refer to How To Manage Imported Accounts to see how to manage the imported Threads accounts.
B2.2.3. Device Scan Wifi Mode
If you use the box phone that needs to scan wifi to use real phones, you tick Device Scan Wifi Mode. Other wise, you do not tick on Device Scan Wifi Mode.
B2.3.4. Check for duplicate users
In case you want our Threads automation bot to avoid duplicated users when it runs Follow features, you tick on Check for duplicate users. Otherwise, you do not tick this section.
After checking for duplicated users, you can click on Clear data user follow to delete the duplicated users.
B2.3.5. Auto change password
In some cases, Threads will ask to change passwords when the bot login the imported Threads accounts. You can tick Auto change password section, our Threads automation bot will change passwords and update new passwords for your Threads accounts automatically.
B2.3.6. Add Proxy Imap
In case you use Threads accounts that require accessing IMAP to get verification codes, you can tick on Add Proxy Imap to fake IPs when the bot accesses IMAP. Next, you click 
=> an Import Proxy dialog box will appear => you import proxies in the format IPAddress:Port:ProxyUsername:ProxyPassword (each proxy is on 1 line)
Then, at Proxy Repeat section, you enter the number of times you want the software to reuse a proxy => click Save.
For example, if you enter 3 into Proxy Repeat section, our QniThreads (Real Phone) software will reuse each proxy 3 times.
If you do not tick on Add Proxy Imap, our QniThreads (Real Phone) bot will use the IP connected to your PC to access Imap and get verification codes in needed cases.
B2.3.7. Folder Backup
You create a new folder => copy the path and paste it into Folder Backup section. At the first login, our software will save the Threads account cookies in this folder. In the next run, the software will use the saved cookies and will not need to login these Threads accounts again.
B2.3. Network
At Network section, you select one of 4 choices: No Proxy, Proxy (From Account Data), Proxy (From File), HMA VPN.
B2.3.1. No Proxy
If you do not want to use proxy, you choose No Proxy in Network box. Our QniThreads (Real Phone) bot will use the IP connected to your PC.
Note: If you use 1 IP to login multiple Threads accounts, your accounts can be banned. Therefore, you can refer to proxygeo.com to buy the best proxy for running this Threads automation bot.
B2.3.2. Use Proxy From File
To use proxies from files, you choose Proxy (From File) at Network section => click on Enter File button => you will see the Import Proxy dialog box
Then, you enter proxy in format IP:Port:ProxyUsername (if any):ProxyPassword (if any), each proxy is on 1 line
Next, you enter the number of Threads accounts you want to login with 1 proxy at Account per proxy section.
For example, if you enter 4 into this section, our Threads (Real Phone) software will login 4 Threads accounts with 1 proxy.
Then, at Proxy import options section, you have two choices:
- If you want the bot to use proxies in order, you select Sequence
- If you want the bot to use random proxies, you choose Random
If you tick on Do not enter accounts that already have proxy, the bot will not use proxy in this file to login accounts that you imported with proxy already (refer to B2.3.2. Import Threads accounts section)
If you want to use the imported proxies in the Import Proxy dialog box whether the Threads accounts had been imported with proxies or not, you do not tick on Do not enter accounts that already have proxy
Finally, you click Add, the bot will check the imported proxies and close the Import Proxy dialog box automatically.
B2.3.3. Use Proxy From Account Data
In case you select Proxy (From Account Data) at Network section, you need to import proxy with Threads accounts. Refer to B2.2.2. Import Threads accounts section to see how to add accounts with proxy.
B2.3.4. HMA VPN
You choose HMA VPN at Network section if you want to use HMA VPN
C. HOW TO RUN EACH FEATURE OF QNITHREADS (REAL PHONE) – THREADS AUTOMATION BOT
Note:
- You need to choose the Threads accounts you want to use before running any feature of this QniThreads (Real Phone) bot.
- You tick the feature you want to run in Function box. You can run multiple functions simultaneously (except Follow Mass function).
C1. Follow Mass – Threads Automation Bot
When you run Follow Mass feature, our QniThreads (Real Phone) software will use all imported Threads accounts to increase bulk followers for the imported users in List Username box.
In Function box, you tick on Follow Mass => click => the Follow Mass dialog box will display
Then, in List Username box, you put the usernames of Threads accounts that you want to increase mass followers (each username is on 1 line)
Next, at Delay time section, you enter the range of time (number of seconds) that you want our Threads automation bot to rest after following each imported user in List Username box.
For example, if you put 20 and 50 into Delay time section, our QniThreads (Real Phone) bot will randomly rest 20 to 50 seconds after following each imported user.
Then, at Follow per run section, you enter the number of follows you want to run with each Threads account
For example, if you put 2 and 6 into Follow per run section, our bot will use each imported Threads account to follow 2 to 6 Threads users you imported in List Username box
Next, at Max Per Target section, you set the total number of followers you want to increase for each imported Threads user in List Username box
For example, if you enter 100 into Max Per Target section, our QniThreads (Real Phone) software will add 100 followers for each imported Threads user in List Username box
Finally, you click Add => you click Start in the Control center box to run Follow Mass feature.
C2. Follow List Users
When you run Follow List Users feature, our QnIThreads (Real Phone) software will randomly use each imported Threads account to follow each imported user in List username box.
First, in Function box, you tick on Follow List Users => click => you will see Follow Users dialog box
Next, at Follow count section, you enter the number of users that you want each Threads account to follow
For example, if you put 10 and 15 into Follow count section, our Threads automation bot will use each Threads account to randomly follow 10 to 15 users in List Username box
Then, at List Username section, you put the username of Threads users that you want to follow => click Add.
Finally, you click Start in the Control center box to run Follow List Users feature.
To check which users have been followed already, you can refer to B2.2.3. Check for duplicate users sections.
C3. Interact with Posts on “For You” Feed
First, in Function box, you tick Interact with “For You” => click on to see Interact with “For You” dialog box
C3.1. Total Time
At Total time section, you enter the total range of time (in seconds) you want the bot to interact with posts on “For You” feed.
For example, if you put 60 and 120 into Total time section, our Threads automation tool will randomly interact with posts on “For You” in 1 to 2 minutes (60 – 120 seconds).
C3.2. Like
If you want QniThreads bot to like posts on “For You” feed, you tick Like => set the number of Threads posts that you want each Threads account to like.
For example, if you enter 3 and 6 into Like section, our QniThreads (Real Phone) will use each Threads account to randomly like 3 to 6 posts on “For You” feed.
If you do not want to like posts on “For You” feed, you do not tick Like section.
C3.3. Comment
If you want our QniThreads (Real Phone) bot to comment on Threads posts, you tick Comment section. Next, you put the number of posts that you want to comment with each imported Threads account.
For example, if you enter 1 and 4 into Comment section, our QniThreads (Real Phone) bot will randomly put 1 to 4 comments on Threads posts on “For You” feed.
Then, you enter the content that you want to comment into Comment Content box. You have 3 choices in putting comment content:
- If you want the bot to comment 1 line of content, you tick The content is only one line at Options section and enter each content on 1 line.
- If you want the bot to comment with multiple lines of content, you tick The content has multiple lines at Options section.
Note: you use “|” to separate the content.
For example, if you enter the content into the Comment content box as the following image, our QniThreads (Real Phone) software will put 2 comments with the following content:
“the content makes me feel happy
can’t help waiting for your helpful post”
and
“it is so attractive
make sure you are a kind girl
I like it a lot”
- If you enter the Comment Content with spintax format, you do not need to select any choice at Options section.
In case you do not want to comment on “For You” feed posts, you do not tick on Comment section.
Finally, you click Add => click Start in the Control center box to run Interact with “For You” feature.
C4. Mass Like – Interact with Specific Posts on Threads
First, in Fuction box, you tick Mass Like, then you click to see Mass Like dialog box
Next, in List of post links box, you enter links of Threads posts you want to interact (each link is on 1 line)
Then, at View posts section, you enter the range of time (number of seconds) that you want our Threads automation bot to view each Threads post
For example, if you enter 10 and 20 into View posts section, our QniThreads (Real Phone) bot will randomly view each post in 10 to 20 seconds.
Next, if you want the bot to like the imported Threads posts, you tick on Like section. Otherwise, you do not need to tick on Like section.
Then, if you want to comment on the imported posts, you tick on Comment section. Next, you enter the content that you want to comment into Comment Content box. Then, please refer to B2.3.3. Comment section to see instructions to import comment content.
In case you do not want to comment on Threads posts, you do not tick on Comment section.
Finally, you click Add => click Start in the Control center box to run Mass Like function.
C5. Upload Post – Threads Automation Bot
In Function box, you tick Upload Post => click on => you will see the Upload Post dialog box
C5.1. Text Content
If you want to post on Threads with text content, you tick Text content section. Next, you enter the content that you want to post into List of contents box. You can set text content with 3 options:
- If you want our QniThreads (Real Phone) to post text with 1 line of content, you enter each content on 1 line and tick The content is only one line at Options section.
- If you want the bot to post text with multiple lines of content, you tick The content has multiple lines at Options section.
Note: you use “|” to separate the content.
For example, if you enter the content into the Comment content box as the following image, our QniThreads (Real Phone) software will upload 3 posts with the following text content:
- “I’m not the kind of person who tries to be cool or trendy, I’m definitely an individual.
If you can do what you do best and be happy, you’re further along in life than most people.”; - “Pay close attention to those who don’t clap when you win.
Brothers don’t necessarily have to say anything to each other
They can sit in a room and be together and just be completely comfortable with each other.”; - “Be yourself; everyone else is already taken
Well done is better than well said.”
- “I’m not the kind of person who tries to be cool or trendy, I’m definitely an individual.
- If you enter the Text Content with spintax format, you do not need to select any choice at Options section.
If you do not want to post text on Threads, you do not tick on Text content section.
C5.2. Upload Media
If you want to upload posts with media, you tick Upload Media section. Next, you create a new folder to save the media that you want to upload to Threads. Then, you copy the path of the created folder of media and paste it into Media folder section
Then, at Number of Media/post section, you enter the number of photos/videos that you want to upload per post on Threads. Next, at File upload wait time section, you enter the range of time ( number of seconds) for the software to wait when it uploads each media.
For example, if you set up Number of Media/post and File upload wait time sections, our Threads automation software will randomly upload 1 to 4 photos/videos to each Threads post. When QniThreads (Real Phone) bot uploads each photo/video, it will randomly wait for 50 seconds to 3 minutes.
Next, if you want the bot to delete the posted photos/videos, you tick Delete posted media section. Otherwise, you do not tick Delete posted media section.
Then, If you want our Threads automation bot to add a watermark to the images before uploading images to Threads, you tick Watermark (only applicable for images) section. Next, in List watermark box, you enter the watermark you want to add (each watermark is on 1 line). Then, at Watermark size ratio section, you enter the size of of watermark that you want the bot to add in comparison with the image.
For example, you enter 3 and 6 into Watermark size ratio section, our QniThreads (Real Phone) software will randomly add watermark text with the size of 3% to 6% of images.
If you do not want to add watermarks to images, you do not tick on Watermark section.
In case you do not want to upload media, you do not tick Upload Media
C5.3. Hashtag
If you want our Threads automation bot to post on Threads with hashtags, you tick Hashtag section. Next, you enter the hashtag you want to post into List Hashtag box (each hashtag is on 1 line). Then, at Number of hashtags/content section, you put the number of tags per post you want to upload.
For example, if you put 5 to 7 into Number of hashtags/content section, our QniThreads (Real Phone) will randomly upload each post with 5 to 7 hashtags.
If you do not want to post on Threads with hashtags, you do not tick Hashtag section.
C5.4. Tag Name
If you want to tag other users with the post on Threads, you tick Tag Name section. Next, in List Usernames box, you put the usernames of Threads accounts that you want to tag (each username is on 1 line). Then, at Number of tagname/ content section, you set the number of users you want to tag per post.
For example, if you want to post on Threads and tag 2 to 6 users, you set up as the following image
If you do not want to tag other users when our QniThreads bot posts on Threads, you do not tick on Tag Name section.
C5.5. Location
If you want our Threads automation tool to post on Threads with location, you tick Location section. Next, you put the locations you want to post into List Location box (each location is on 1 line).
If you do not want to post on Threads with location, you do not tick Location section.
Finally, you click Add => click Start in the Control center box to run Upload Post feature.
C6. Change website and bio
First, in Function box, you select Change website and bio => click to see the Change website and bio dialog box.
C6.1. Change website
If you want to change websites for imported Threads accounts, you tick Website section => click Enter => the Enter the list Website dialog box will appear. Next, you enter the website links into List of Website box (each link is on 1 line) => click Add. You can put website links with 2 choices:
- If you want to update 1 website link for each Thread account, you choose The content is only one line at Option section.
- If you want to update multiple websites for each Threads account, you choose The content has multiple lines at Option section. You use ‘|” to separate website links for each account.
C6.2. Change bio
If you want to change the bio for imported Threads accounts, you tick Bio section => click Enter, the Enter the list bio dialog box will display => enter the bio content into List of Bio box (each bio is on 1 line) => click Add
- If you want to update bio with 1 line of content for each Thread account, you choose The content is only one line at Option section.
- If you want to update bio with multiple lines for each Threads account, you choose The content has multiple lines at Option section. You use ‘|” to separate bio content for each account.
For example, if you enter the content into List of Bio box as the following image, the bot will update bio with 2 content.
- If you want enter bio content with spintax format, you do not need to choose any choice at Option section.
Next, if you want to pass Threads accounts that have updated website and bio already, you tick Do not update information if already available.
If you want to update the website and bio for all of imported Threads accounts, you do not tick on Do not update information if already available.
Finally, you click Add => click Start in the Control center box to run Change website and bio feature.
Thank you for following the tutorial on how to use our QniThread (Real Phone) software.
PRICE OF QNITHREADS (REAL PHONE) – THREADS AUTOMATION BOT
