Threads has become one of the most influential platforms in recent years. To spread influence on Threads quickly, many users choose to use Threads automation software to automate multiple activities on Threads. QniThreads is one of the most recommended Threads automation bots that helps users:
- Auto increaseThread followers in bulk
- Increase bulk likes and comments for Threads posts automatically
- Auto upload multiple posts on Threads
- Interact with Threads posts on “For You” feed automatically
- Auto follow Threads accounts by user list
Moreover, when you use QniThreads software, you can
- Using proxies to fake IPs from different countries
- Easily use the bot with tutorials in text and videos
- Get professional and quick support
- Get free and frequent updates
- Save time and cost
A. INSTALL QNITHREADS BOT – THREADS AUTOMATION SOFTWARE
A1. Install the LDPlayer
Follow the instructions in Tutorial – LDPlayer to install the LDPlayer.
A2. Install the QniThreads software
Refer to How to buy Qnibot software to see instructions on how to buy and download our QniThreads tool.
After downloading the bot, you right-click on the 
=> click Extract Here
Then, you double click on 
=> click Next
Next, you will see the Select Installation Folder dialog box => click on Browse, the Browse for Folder dialog box will appear => select the folder that you want to save the installation of QniThreads bot => click OK => click Next
Note: do not save the installation folder of QniThreads bot in the Program Files (x86) folder in Disk (C:) or any folder whose name has special characters.
Then, you will see the Confirm Installation dialog box => click Next and wait for installing our QniThreads software
After that, the Installation Complete dialog box will appear, you click Close
Then, you back to your desktop => double-click on the QniThreads shortcut.
Note: In case the bot asks for installing environment variables, please refer to Tutorial – Install Environment Variable
Next, you need to enter the provided license into Key section
Then, you open the LDPlayer9 folder (you download LDPlayer as instructions in A1.section, it is often saved in Disk (C:)) => copy the path of this folder to paste it into LDPlaryer Path section => click Login
The interface of QniThreads software will appear
B. HOW TO USE QNITHREADS SOFTWARE – BASIC SETTINGS
B1. Devices
You click on the Devices tab to see the sections you need to set devices => click Load Devices
Then, you click Setup and wait for the bot to set up the LDPlayers.
B2. Home – Threads Automation Software
You click on Home tab to see sections that you need to set up.
B2.1. Choose a script option
You need to create scripts before setting up other sections.
B2.1.1. Create and choose the script name
To create a script name, you enter the script name into the Script Name section => click 
to add the script.
Next, you choose the script you want to run at Select a script section.
B2.1.2.Set up the order of actions
If you tick on Randomize the order of actions, our Threads automation software will run all features you selected at Fucntion section randomly.
If you do not tick on Randomize the order of actions, our Threads automation software will run all functions you selected at Fucntion section in order.
B2.1.3. Repeat after (Minutes)
In case you want the bot to repeat selected functions at Function section, you tick on Repeat After (Minutes) => enter the range of time (in minutes) you want the bot to rest before repeating the selected functions.
For example, if you set up as the following photo, our Threads automation software will randomly rest for 3 to 5 minutes before repeating the selected features.
B2.2. Control center
B2.2.1. Number of threads to run
You put the number of LDPlayers that you want our QniThreads software to run simultaneously into Number of threads to run section.
For example, you put 10 into Number of threads to run section, our QniThreads tool will open 10 LDPlayers to login 10 Threads accounts at the same time.
B2.2.2. Import Threads accounts
To import Threads accounts,you click on Add account button => you will see Add Accounts dialog box
Next, you need to create a folder to save Threads accounts. You click on Add button at Select a folder section => the Add Folder dialog box will appear => enter the name of the folder you want to create into Folder name section => click Add
Then, you select the folder you want to use for saving your Threads accounts at Select a Folder section
Next, at Input format section, you choose the format you want to import accounts.
Note:
- If you choose Proxy (From Account Data) at Network section (refer to B2.3.3 section), you need to select the format containing proxy.
- In case you want to add accounts in another format apart from the available formats, you choose Other at Input format section, then you enter the format you want to import accounts => click Save Format
After that, you import Threads accounts into the box with the selected format => click Add => click OK => click Close.
The imported Threads accounts will display as shown the following photo
Next, you click on Display Configuration => tick on the configuration that you want to display => click Add => click Close
To search for any imported Threads accounts, you can select the group of accounts, then enter the account that you want to search as the following photo
You can refer to How To Manage Imported Accounts – LDPlayer Version Software to see how to manage the imported Threads accounts.
B2.2.3. Check for duplicate users
In case you want our Threads automation tool to avoid duplicated users when it runs Follow features, you tick on Check for duplicate users.
After checking for duplicated users, you can click on Clear data user follow to delete the duplicated users.
B2.2.4. Auto change password
In some cases, Threads asks to change passwords when the bot logs into the imported Threads accounts, you can tick on Auto change password section, our Threads automation software will change passwords and update new passwords for your Threads accounts automatically.
B2.3. Network
At Network section, you choose one of three options: No Proxy, Proxy (From File), Proxy (From Account Data).
B2.3.1. No Proxy
If you do not want to use proxy, you choose No Proxy at Network section. Our QniThreads tool will use the IP connected to your PC.
Note: In case you use 1 IP address to login multiple Threads accounts, your Threads accounts can be banned. Therefore, you can refer to proxygeo.com to buy the best proxy for QniThreads tool.
B2.3.2. Use Proxy From File
If you want to use proxy, you choose Proxy (From File) at Network section => click on Enter File button => the Import Proxy dialog box will appear
Next, in the Proxy List box, you enter proxy in format IP:Port:ProxyUsername (if any):ProxyPassword (if any), each proxy is on 1 line
Next, you enter the number of Threads accounts that you want to use with 1 proxy at Account/proxy number section.
For example, if you enter 2 into this section, our QniThreas bot will login 2 Threads accounts with 1 imported proxy.
Then, at Proxy import options section, you select one of two choices:
- If you want the bot to use proxies in order, you select Sequence
- If you want the bot to use proxies randomly, you choose Random
If you tick on Do not enter accounts that already have proxy, our QniThreads bot will not use proxy in this file to login Threads accounts that you imported with proxy already (refer to B2.2.2. Import Threads accounts section)
If you want to use the imported proxies in the Import Proxy dialog box whether the Threads accounts had been imported with proxies or not, you do not tick on Do not enter accounts that already have proxy
Finally, you click Add, the bot will check the imported proxies and close the Import Proxy dialog box automatically.
B2.3.3. Use Proxy From Data
If you choose Proxy (From Account Data) at Network section, you need to import proxy with Threads accounts. Refer to B2.2.2. Import Threads accounts section to see how to add Threads accounts with proxies.
After finishing all basic settings, you click Save.
All these sections mentioned above are basic settings you need to set up before running any feature of QniThreads bot. In the next part, we will instruct you to run each function of our QniThreads tool.
C. HOW TO RUN EACH FUNCTION OF QNITHREADS SOFTWARE
Note:
- Remember to select the Threads accounts before running any functions of this QniThreads bot.
- You tick the feature you want to run in Function box. You can run multiple functions at the same time (except Follow Mass function).
C1. Follow Mass – Threads Automation Software
When you run Mass Follow feature, our QniThreads bot will use all imported Threads accounts to increase bulk followers for the imported users in List Username box.
In Function box, you tick on Follow Mass => click 
, you will see the Follow Mass dialog box
In List Username box, you put the username of Threads accounts that you want to increase mass followers (each user is on 1 line)
Next, at Delay time section, you set the number of seconds that you want the bot to rest after following each imported user (you imported in List Username box).
For example, if you enter 10 and 30 into Delay time section, our QniThreads bot will randomly rest 10 to 30 seconds after following each imported user above.
Then, at Follow per run section, you enter the number of follows you want to run with each Threads account
For example, if you enter 6 and 8 into Follow per run section, our bot will use each imported Threads account to follow 6 to 8 Threads users (you imported in List Username box)
Next, at Max Per Target section, you enter the total number of followers you want to increase for each imported Threads user in List Username box
For example, if you enter 250 into Max Per Target section, our QniThreads bot will add 250 followers for each imported Threads user in List Username box
Finally, you click Add => you click Start in the Control center box to run Follow Mass feature.
C2. Follow List Users
When you run Follow List Users feature, our Threads automation software will randomly use each imported Threads account to follow each imported user in List username box.
First, in Function box, you tick on Follow List Users => click => you will see Follow Users dialog box
Next, at Follow count section, you enter the number of users that you want each Threads account to follow
For example, if you put 2 and 5 into Follow count section, each Threads account will be used to follow randomly 2 to 5 users in List Username box
Then, at List Username section, you put the username of Threads users that you want to follow => click Add.
Finally, you click Start in the Control center box to run Follow List Users feature.
To check which users have been followed already, you can refer to B2.2.3. Check for duplicate users sections.
C3. Mass Like – Interact with Threads Posts
In Fuction box, you tick Mass Like, then you click => Mass Like dialog box will appear
Next, in List of post links box, you put links of Threads posts you want to like (each link is on 1 line)
Then, at View posts section, you enter the range of time (number of seconds) that you want QniThreads software to view each Threads post
For example, if you put 5 and 10 into View posts section, our Threads automation software will randomly view each post in 5 to 10 seconds.
Next, if you want the bot to like the imported Threads posts, you tick on Like section. Otherwise, you do not need to tick on Like section.
Then, if you want to comment on the imported posts, you tick on Comment section. Next, you enter the content that you want to comment into Comment Content box. You can import content in spintax format.
- If you want the bot to comment 1 line only, you enter each content on 1 line and tick The content is only one line at Options section.
- If you want the bot to comment with multiple lines of content, you tick The content has multiple lines at Options section.
Note: you use “|” to separate the content.
For example, if you enter the content into the Comment content box as the following photo, our QniThreads bot will put 2 comments with the following content:
“so funny
next post, please”
and “the content makes me feel happy
it is so attractive
can’t help waiting for your helpful post”
- If you enter the Comment Content with spintax format, you do not need to select any choice at Options section.
In case you do not want to comment on Threads posts, you do not tick on Comment section.
Finally, you click Add => click Start in the Control center box to run Mass Like feature.
C4. Interact with “For You” Feed
In Function box, you tick Interact with “For You” => click on => you will see Interact with “For You” dialog box
C4.1. Total Time
At Total time section, you enter the total range of time (in seconds) you want the bot to interact with “For You” feed.
For example, if you put 20 and 50 into Total time section, our QniThreads bot will randomly interact with “For You” feed in 20 to 50 seconds.
C4.2. Like
If you want QniThreads bot to like posts on “For You” feed, you tick Like => enter the number of Threads posts that you want each Threads account to like.
For example, if you enter 2 and 4 into Like section, the bot will use each Threads account to randomly like 2 to 4 posts on “For You” feed.
If you do not want to like posts on “For You” feed, you do not tick Like section.
C4.3. Comment
If you want our QniThreads software to comment on Threads posts, you tick Comment section. Next, you put the number of posts that you want to comment with each imported Threads account.
For example, if you enter 2 and 5 into Comment section, our Threads automation software will randomly put 2 to 5 comments on Threads posts.
Then, you enter the content that you want to comment into Comment Content box. You can import content in spintax format.
- If you want the bot to comment 1 line only, you tick The content is only one line at Options section and put each content on 1 line.
- If you want the bot to comment with multiple lines of content, you tick The content has multiple lines at Options section.
Note: you use “|” to separate the content.
For example, if you enter the content into the Comment content box as the following photo, our QniThreads bot will put 2 comments with the following content:
“I strongly believe that you are an expert in this field
Waiting for your next post”
and “so useful
I am so happy
can’t help waiting for your helpful post”
- If you enter the Comment Content with spintax format, you do not need to select any choice at Options section.
In case you do not want to comment on “For You” feed posts, you do not tick on Comment section.
Finally, you click Add => click Start in the Control center box to run Interact with “For You” feature.
C5. Upload Post – Threads Automation Software
In Function box, you tick Upload Post => click on => the Upload Post dialog box will appear
C5.1. Text Content
If you want to post text on Threads, you tick Text content section. Next, you enter the content that you want to post into List of contents box.
- If you want the bot to comment 1 line only, enter each content on 1 line and tick The content is only one line at Options section.
- If you want the bot to comment with multiple lines of content, you tick The content has multiple lines at Options section.
Note: you use “|” to separate the content.
For example, if you enter the content into the Comment content box as the following photo, our QniThreads bot will put 3 comments with the following content:
“You must be the change you wish to see in the world
The only thing we have to fear is fear itself.”
“Darkness cannot drive out darkness: only light can do that.
Do one thing every day that scares you
Well done is better than well said.”
and “It is during our darkest moments that we must focus to see the light.
Be yourself; everyone else is already taken.”
- If you enter the Comment Content with spintax format, you do not need to select any choice at Options section.
If you do not want to post text on Threads, you do not tick on Text content section.
C5.2. Upload Media
If you want to upload media to Threads, you tick Upload Media section. Next, you create a new folder to save the media that you want to post on Threads. Then, you copy the path of the created folder and paste it into Media folder section
Then, at Number of Media/post section, you enter the number of photos/videos that you want to upload per post on Threads. Next, at File upload wait time section, you enter the range of time ( number of seconds) for the bot to wait when it uploads each media.
For example, if you set up Number of Media/post and File upload wait time sections, our Threads automation software will randomly upload 2 to 5 photos/videos to each Threads post. When QniThreads bot uploads each photo/video, it will randomly wait for 45 seconds to 2 minutes.
Next, if you want the bot to delete the posted photos/videos, you tick Delete posted media section. Otherwise, you do not tick Delete posted media section.
Then, If you want our QniThreads to add a watermark to the images before posting images on Threads, you tick Watermark (only applicable for images) section. Next, in List watermark box, you enter the watermark you want to add (each watermark is on 1 line). Then, at Watermark size ratio section, you enter the size of of watermark that you want the bot to add in comparison with the image.
For example, you enter 3 and 10 into Watermark size ratio section, our Threads automation software will randomly add watermark text with the size of 3% to 10% of images.
If you do not want to add watermarks to images, you do not tick on Watermark section.
In case you do not want to upload media, you do not tick Upload Media
C5.3. Hashtag
If you want our QniThreads bot to post on Threads with hashtags, you tick Hashtag section. Next, you enter the hashtag you want to post into List Hashtag box (each hashtag is on 1 line). Then, at Number of hashtags/content section, you put the number of tags per post you want to upload.
For example, if you put 2 to 5 into Number of hashtags/content section, our Threads automation software will randomly add 2 to 5 hashtag to each post on Threads.
If you do not want to post on Threads with hashtags, you do not tick Hashtag section.
C5.4. Tag Name
You want to tag other users with the post on Threads, you tick Tag Name section. Next, you enter the usernames of Threads accounts that you want to tag (each username is on 1 line). Then, at Number of tagname/ content section, you enter the number of users you want to tag per post.
For example, if you want to post on Threads and tag 3 to 5 users, you set up as the following image
If you do not want to tag other users when our QniThreads bot posts on Threads, you do not tick on Tag Name section.
C5.5. Location
If you want our QniThreads bot to post on Threads with location, you tick Location section. Next, you enter the locations you want to post into List Location box (each location is on 1 line).
If you do not want to post on Threads with location, you do not tick Location section.
Finally, you click Add => click Start in the Control center box to run Upload Post feature.
C6. Change website and bio
First, in Function box, you select Change website and bio => click , you will see the Change website and bio dialog box.
Next, if you want to change websites for imported Threads accounts, you tick Website section => click Enter => you will see the Enter the list Website dialog box => enter the website links into List of Website box (each link is on 1 line) => click Add
- If you want to update 1 website link for each Thread account, you choose The content is only one line at Option section.
- If you want to update multiple websites for each Threads account, you choose The content has multiple lines at Option section. You use ‘|” to separate website links for each account.
Then, if you want to change the bio for imported Instagram accounts, you tick Bio section => click Enter, the Enter the list bio dialog box will display => enter the bio content into List of Bio box (each bio is on 1 line) => click Add
- If you want to update bio with 1 line of content for each Thread account, you choose The content is only one line at Option section.
- If you want to update bio with multiple lines for each Threads account, you choose The content has multiple lines at Option section. You use ‘|” to separate bio content for each account.
For example, if you enter the content into List of Bio box as the following image, the bot will update bio with 2 content.
Next, if you want to pass Threads accounts that have updated website and bio already, you tick Do not update information if already available.
If you want to update the website and bio for all of imported Threads accounts, you do not tick on Do not update information if already available.
Finally, you click Add => click Start in the Control center box to run Change website and bio feature.
Thank you for following the tutorial on how to use our QniThread software.
PRICE OF QNITHREADS – THREADS AUTOMATION SOFTWARE
