A2. Install theTinderAutoBot and environment variables
First of all, you login your account on Qnibot.com => click on at your username => select License Key => click on under TinderAutBot in the SOFTWARE column => download the TinderAutBot.msi.
After downloading the bot, you double click on => click Next
Next, the Select Installation Folder dialog box will appear=> click on Browse, you will see the Browse for Folder dialog box => select the folder that you want to save the installation of TinderAutoBot => click OK => click Next
Note: do not save the installation folder in the Program Files (x86) folder in Disk (C:) or any folder whose name has special characters.
After that, you will see the Confirm Installation dialog box => click Next
At Installation Complete dialog box, you click Close
After finishing the environment variable installation, you back to your desktop => double-click on the TinderAutoBot shortcut to open the software. Then, you visit qnibot.com/License to see your license management table => click on in ACTION column => click OK => paste the copied license into Key section.
Next, you open the LDPlayer9 folder (it is often saved in Disk (C:)) => copy the path of this folder to paste it into LDPlaryer Path section.
Finally, you click Login => the interface of TinderAutoBot bot will display
B. HOW TO USE TINDER BOT – GENERAL SETTINGS
B1. Device – Tinder Bot
First, you click on Devices tab to see the sections that you need to set devices.
Secondly, click Load Devices to load all the created LDPlayers.
Finally, you click Set up and wait for the TinderAutoBot to set up the devices => you will see Done in Status column when the bot sets up devices successfully.
Note: you set up devices one time for the first run only. After that, the bot will run automatically, you do not need to set up devices anymore.
B2. Home – Tinder Bot
Click Home tab, you will see sections that you need to set up
B2.1. Run & Thread sections
At Run section, you put the total number of times that you want the bot to run successfully.
For example, if you enter 500 into Run, our Tinder bot will stop automatically after running 500 times successfully.
Next, at Thread section, you set the number of tabs that you want the TinderAutoBotto run at the same time.
Note: the number of threads must be less than or equal to the number of LDPlayers that you loaded in B1. Devices section.
For example, if you put 3 into Thread section and run Reg Phone function, the bot will open3 LDPlayers and create 3 Tinder accounts simultaneously.
You choose one of two options: No Proxy or Proxy (From File)
If you do not want to use proxy, you can choose No Proxy, our TinderAutoBot will use the IP connected to your PC.
Note: You should use proxies to create bulk Tinder accounts. In case you create multiple Tinder accounts with the same IP, the created accounts can be banned.
If you want to use proxy, you choose Proxy (From File) => click on => the Import Proxy dialog box will appear => you enter proxy in format IP:Port:ProxyUsername (if any):ProxyPassword (if any), each proxy is on 1 line => click Save
Refer to Proxygeo.com to buy the best proxy for creating bulk Tinder accounts
C. HOW TO RUN EACH FEATURE OF TINDER BOT
There are 3 functions that you can run, consisting of Reg Phone, Auto Swipe Likes, and About me. You need to run Reg Phone function before running the other functions.
C1. Register bulk Tinder accounts
You select Reg Phone at Action section.
C1.2. OTP Service
At OTP Service section, you select the OTP site that you want to use when the bot creates Tinder accounts
If you choose Viotp.com or Yuenanka.com at OTP Service section, our TinderAutoBot will create Tinder accounts with Vietnamese phone numbers. Next, you need to opt the Internet Service Provider at OTP Country section
If you choose Getsmscode.io, 5sim.net, 365sms.org at OTP Service section, you need to select the OTP country at OTP Country section
Next, you create an account at the selected OTP site => top up your account => copy the API key to paste it into API Key section
Note: If you select 5sim.net OTP site, you need to get the API key for 5sim protocol.
C1.3. Add Recovery Email
In case you want our Tinder bot to verify email when it creates Tinder accounts automatically, you tick on Add Email => click on to see the Import EmailRecovery dialog box => you enter the recovery email that you want to use in format Domain(orEmailAddress)|Password|ImapServer|ImapPort (each email is on 1 line) => click Save
If you want to use catch-all email accounts as recovery email, you tick on Catch-all and import catch-all email accounts one per line
If you want to use other types of emails as recovery email, you do not tick on Catch-all and import recovery emails one per line. For example, we use hotmail accounts as the following photo
You can search on Google for the Imap Server and Imap Port of the type of email that you use. For example, these are the Imap Server and Imap Port of Hotmail
If you use Gmail accounts, you need to turn on 2FA for the imported Gmail accounts, create app passwords and use app passwords instead of Gmail passwords.
You should add recovery emails to increase the successful rate of creating Tinder accounts.
In case you do not want to verify email when our Tinder bot creates bulk Tinder accounts, do not tick on Add Email section.
At Gender section, you choose the gender that you want the bot to select when it creates Tinder accounts. If you select Random, the bot will randomly select Man or Woman.
If you want to show gender on the created Tinder accounts, you tick on Show Gender. Otherwise, you do not tick on Show Gender.
C1.4.2. Full Name
At Full Name section, you can choose one of three options:
In case you select Random US, our Tinder bot will create Tinder accounts automatically with random US names
In case you select Random VN, our TinderAutoBot will create Tinder accounts automatically with random Vietnamese names
In case you choose Customize, the bot will create Tinder accounts as the names you imported. Therefore, you set the last name and first name as you want as the below instructions
Click on Enter Last Name => enter the last name you want to use into Import Last Name dialog box, each last name needs to be entered on 1 line => click Save
Click on Enter First Name => enter the first name you want to use into Import First Name dialog box, each first name needs to be entered on 1 line => click Save
You can select one of two options:
Click on Random in case you want the TinderAutoBot to use random usernames to create new Tinder accounts.
Click on Customize in case you want to customize the username of Tinder accounts that will be created. Next, you click on => enter the username that you want the bot to use, each username needs to be entered on 1 line => click Save
C1.4.4. Upload Photos
Our TinderAutoBot will upload photos after creating new Tinder accounts automatically. You need to create a new folder to save images you want to upload. Then, you copy and paste the photo folder path into the Folder section.
Next, at Image from…to… section, you enter the number of photos that you want the bot to upload per Tinder account
For example, if you put 2 and 4 into Image from…to… section, our Tinder bot will randomly upload 2 to 4 photos after creating a Tinder account successfully.
Note: the minimum number of photos you need to upload for each Tinder account is 2.
Then, you tick on Del Image if you want the bot to delete photos that had been uploaded
In case you do not want to delete photos that had been uploaded, you do not tick on Del Image.
C1.5. Auto Swipe Likes
If you want to swipe and like after creating Tinder accounts, you tick on Auto Swipe Likes section. Next, you enter the range of time that you want the bot to swipe and like for each created Tinder account.
You do not tick on Auto Swipe Likes section if you do not want to run Auto Swipe Likes function.
C1.6. About me
If you want to update About me section for created Tinder accounts, tick on About me. Next, you enter the content you want to update into About content box (each content is on 1 line).
If you want to update About me with 1 line of content only, you choose The content is only one line at Options section
If you want to update About me section with many lines of content, you choose The content has multiple lines line at Options section
Note: you use “|” to separate the content.
For example, you enter the content into the About content box as the following photo, the bot will use 2 content:
“I love my followers more than life itself
So many of my smiles are because of you”
and “All your dreams can come true and I’ll make sure of it
Live in the sunshine where you belong
My life is better than my daydreams”.
If you import About content with spintax format, you do not need to select any choice at Option sections.
Finally, you click Start
C1.7. Manage created Tinder accounts
The created Tinder accounts will be updated in Home tab
If you want to change the display information, you click on Display Configuration => tick on the configuration that you want to display => click Add => click Close
After creating bulk Tinder accounts, you can farm these created accounts with Auto Swipe Likes feature
First, you tick on the Tinder accounts that you want to swipe and like. Next, you choose Auto Swipe Likes at Action section => enter the range of time that you want the bot to swipe and like for each created Tinder account.
Finally, you click Start.
C3. About me
You can farm these created Tinder accounts by updating About me section.
First of all .you choose the Tinder accounts that you want to update About me section => you choose About me at Action section. Next, you refer to C1.6.About me section to set up About me content.
Finally, you click Start.
Thank you for following the tutorial on how to use our TinderAutoBot.